NetWaySP4WP

Dual Fiber Optic SFP 1G Link 4-port PoE+ switch and power supply; Hardened 120W Power Supply/BatChgr & Switch Boards mounted in NEMA4/4X, IP66 rated Outdoor enclosure

Altronix NetWaySP4WP Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) ports, passing data for PoE/PoE+ compliant devices. Cameras/ edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control, and report power and diagnostics from anywhere.

Specifications

  • Input
    • Voltage: 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
    • Fusing: 5A/250V.
  • Power Output
    • Four (4) PoE/PoE+ (up to 30W) ports.
    • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
    • 120W total power.
    • Integral surge protection.
  • Fiber Ports
    • Two (2) Gigabit SFP ports.
  • Ethernet Ports
    • Four (4) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair CAT5 or better structured cable.
    • Distance: up to 100m.
    • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
  • Battery Charging
    • Type: Sealed lead acid or gel type.
    • Failover: Upon AC loss, instantaneous.
    • (Batteries are sold separately).
  • Indicators (LED)
    • Individual PoE On LEDs for each port.
    • Individual IP Link status, 10/100Base-T/active LEDs for each port.
    • ALOS LED indicates fiber connection for SFP port.
    • Heartbeat LED indicates proper operation of the unit.
  • VLAN
    • Multiple management VLAN assignment.
    • 802.1Q Tagged VLAN. Up to 10 VLAN groups. ID Range 2-4095.
  • LINQ Technology
    • Remote network management allows for camera/device reset and monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and trap message notifications report real-time diagnostics.
    • Event log tracks history.
  • Temperature
      • Operating:
        • 60W: - 40° C to 75° C ( - 40° F to 167° F).
        • 75W: - 40° C to 70° C ( - 40° F to 158° F).
        • 100W: - 40° C to 55° C ( - 40° F to 131° F).
        • 120W: - 40° C to 45° C ( - 40° F to 113° F).
    • Storage: - 40° C to 85° C ( - 40° F to 185° F).
    • Relative Humidity: 85% +/- 5%
    • BTU/Hr. (approx.): 61 BTU/Hr.
  • Operating Altitude
    • - 304.8 to 2,000m.

Agency Listings

UL Listed For:
Information Technology Equipment (UL60950-1)
Information Technology Equipment (UL60950-22)
cUL Listed For:
Information Technology Equipment
 
CE Compliant

Accessories

Name Description
NetWaySP1A PoE Powered Ethernet to Fiber Media Converter/Repeater.
PMK1 Pole Mount Kit, For Outdoor Enclosures
P1MM Small Form-Factor Pluggable (SFP) Multi-Mode Transceiver
P1SM10 Small Form-Factor Pluggable (SFP) Single Mode Transceiver
WG1 NEMA Rated Wire Gland Inlets
P1AB2K Small Form-Factor Pluggable (SFP) Single-Mode Transceiver Kit
P1GCE Small Form-Factor Pluggable (SFP) Copper Transceiver

Similar Products

Name Description
NetWaySP4X Dual Fiber Optic SFP 1G Link, 4 port 10/100/1000 PoE/PoE+ switch and power supply; Hardened 120W Power Supply/BatChgr & Switch Boards mounted in metal Indoor BC300 enclosure
NetWaySP4WPX Dual Fiber Optic SFP 1G Link, 4-port PoE+ switch and power supply; Hardened 120W Power Supply/Battery Charger & Switch Boards mounted in larger NEMA4/4X, IP66 rated Outdoor enclosure
NetWaySP4WPN Dual Fiber Optic SFP 1G Link and 4-port PoE+ switch (uses external power supply); Requires 48-56V input; Hardened Switch Board mounted in NEMA4/4X, IP66 rated Outdoor enclosure
NetWaySP4PL Dual Fiber Optic SFP 1G Link, 4-port PoE+ switch and power supply; Hardened 120W Power Supply/BatChgr & Switch Boards mounted on metal Backplane
NetWaySP4B Dual Fiber Optic SFP 1G Link and 4-port PoE+ ; Requires 48-56V input, Hardened, Switch Board Only

Dimensions & Weight

Enclosure:
  • NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
  • Dimensions 11.31"W x 13.31"H x 5.59"D (287 mm W x 338 mm H x 142 mm D).
Weights (approximate):
  • Product Weigtht: 10.5 Lbs. (4.76 kg).
  • Shipping Weigtht: 11.9 Lbs. (5.4 kg).