eFlow102NBV

Power Supply Charger, Single Output, 12VDC @ 10A, Aux Output, FAI, LinQ2 Ready, 220VAC, Board

Altronix eFlow102NBV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Input Rating
- Input 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A.
Output
- 12VDC output.
- 10A continuous supply current.
- Aux. output rated @ 1A (unswitched).
- Overvoltage protection.
- Filtered and electronically regulated outputs.
Battery Charging
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Transfer to stand-by battery power is instantaneous with no interruption.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
- Battery fail and presence supervision (form "C" contacts).
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
Electrical
- Relative Humidity: 85% +/- 5%.
- BTU/Hr. (approx.): 61 BTU/Hr.
- System AC input VA requirement: 462VA.
Visual Indicators
- Green AC Power LED indicates 220VAC present.
- AC input and DC output LED indicators.
Additional Features
- Short circuit and overload protection.

CE Compliant

Name	Description
LINQ2	Network Communication Module, Control, Monitor and Report Power Supply Diagnostics, Compatible with eFlow Series and MaximalF Power Supply/Chargers